System expansions
Removing a module holder with reader
•
Requirement: The casing is open (see
"Opening the casing", Page 33
).
►
Disconnect the cables connected to the module holder.
1 1
3
2
►
Remove the screws (1).
►
Push the module holder a few centimetres out of the casing in the direction of the arrow (2).
►
Pull the module holder completely out of the casing in the direction of the arrow (3).
►
Remove the reader from the module holder (see
"Removing the reader from
the module holder", Page 46
) and reinstall the module holder (corresponds to
"Installing a module holder with reader", Page 44
).
or
►
Remove the reader from the module holder (see
"Removing the reader from the
module holder", Page 46
) and install a blind cover in the drive bay.
►
Close the casing (see
"Closing the casing", Page 34
).
Fujitsu
45
