System expansions
Installing an accessible drive
►
Fit the drive cover for the 5
1
/
4
inch drive (see
"Fitting the drive cover for
the 5
1
/
4
inch drive", Page 39
).
►
If you have already
fi
tted a cover in the bay (optional), remove it.
Do not throw away the cover. For cooling and protection against
fi
re you must re
fi
t the
cover if you remove the drive again later (see
"Removing an accessible drive", Page 41
).
1
►
Slide the accessible drive together with the attached drive metal plate into
the casing until it engages (1).
►
Connect the cables to the drive. Make sure the polarity is correct.
►
Close the casing (see
"Closing the casing", Page 34
).
It may be necessary to modify the entry for the drive in the
BIOS Setup
.
40
Fujitsu