Fujitsu CELSIUS M740 Operating Manual Download

Page: 39 / 81

System expansions

Installing and removing the accessible 5

inch

drive (Ultra Slim, top drive bay)

The following instructions apply only to the installation and removal of an
accessible drive in Ultra Slim format, in the top drive bay.

Installing an accessible drive

►

Remove the screws (1).

►

Push the drive carrier a few centimetres out of the casing in the direction of the arrow (2).

►

Pull the drive carrier completely out of the casing in the direction of the arrow (3).

Do not dispose of the cover of the Ultra Slim drive bay. For cooling and
protection against

re you must re

t the cover if you remove the drive again

later (see

"Removing an accessible drive", Page 41

►

Remove the cover of the Ultra Slim drive bay.

Fujitsu

Summary of Contents for CELSIUS M740


















































































Search results

Summary of Contents for CELSIUS M740

Reviews:

Related manuals for CELSIUS M740

Brands by name

Popular brands

Fujitsu CELSIUS M740, Operating Manual

Search results

Summary of Contents for CELSIUS M740

Reviews:

Related manuals for CELSIUS M740

Brands by name

Popular brands