Fujitsu BX630 - PRIMERGY - S2 Dual Operating Manual Download Page 33

Page: 33 / 90

BX630 S2

Operating Manual

Installation and Operation

Control and Connection Panel

Voltage/Selection indicator (two-color LED)

Dark:

The BX600 S2 or BX600 S3 basic unit is off, 5 V standby voltage
is not present, or the server blade is not installed properly.

Glows green:

Server blade is running.

Glows orange:

Server blade is off but basic unit is running (5 V standby voltage is
present).

Flashes green:

Server blade is switched on and selected for identification, or this
server blade is in a critical state.

Flashes
orange:

Server blade is switched off and selected for identification, or this
server blade is in a critical state.

Flashes green-
orange

Server blade is in standby mode (ACPI function) or in a critical
state.

Flashes green-
dark-orange

Server blade is in standby mode (ACPI function) and selected for
identification, or this server blade is in a critical state.

On/Off button fully compatible with the Advanced Configuration Power Interface
(ACPI)

If you press the On/Off button when the BX600 S2 or BX600 S3 basic unit is on (5 V
standby voltage is present) and the server blade is switched off, the

power_up

command is sent to the management blade and the server blade is switched on.

If you press the On/Off button for less than 4 seconds when the server blade is
running, the

power_off

command is sent to the management blade and the server

blade is switched off by the management blade (

graceful shutdown

If you press the On/Off button for more than 4 seconds when the server blade is
running, the server blade is switched off immediately.

KVM/MP error indicator (two-color LED)

Dark:

KVM has not been activated for this server blade.

Glows green:

KVM has been activated for this server blade.

Flashes
orange:

KVM has not been activated for this server blade, and this blade
has been deactivated to save energy.

Flashes green-
orange:

KVM has been activated for this server blade, and this blade has
been deactivated to save energy.

KVM button (keyboard/video/mouse)

Pressing this button switches the keyboard, monitor and mouse to this server blade.

I/O status of the optional I/O module (green LED)

I/O

Dark:

System is off or signal synchronization has failed.

Green:

System is switched on and online.

Summary of Contents for BX630 - PRIMERGY - S2 Dual



























































































Search results

Summary of Contents for BX630 - PRIMERGY - S2 Dual

Reviews:

Related manuals for BX630 - PRIMERGY - S2 Dual

Brands by name

Popular brands

Fujitsu BX630 - PRIMERGY - S2 Dual, Operating Manual

Search results

Summary of Contents for BX630 - PRIMERGY - S2 Dual

Reviews:

Related manuals for BX630 - PRIMERGY - S2 Dual

Brands by name

Popular brands