BX630 S2
Operating Manual
37
Installation and Operation
Configuring the Server Blade
Ê
Connect the monitor, keyboard and mouse to the KVM blade on the rear of
the basic unit. For information see the BX600 S2 or BX600 S3 basic unit
operating manual.
Ê
Press the KVM button (position 4 in
figure 7 on page 32
) on the control panel
of the server blade to switch the keyboard, mouse and the monitor of the
KVM blade to the server blade.
Preparing the Software
Booting from the CD-ROM drive
Boot the relevant server blade from the
ServerView Installation Manager
CD to
install the operating system. In some cases this may require that you change a
few settings:
Ê
Insert the
ServerView Installation Manager
CD in the CD-ROM drive and press
the On/Off button (position 2 in
figure 7 on page 32
) on the control panel of
the server blade.
Ê
Press the KVM button (position 4 in
figure 7 on page 32
) on the control panel
of the server blade to switch the keyboard, mouse and the monitor of the
KVM blade to the server blade. Wait a few seconds for the monitor to be
activated.
Ê
When prompted, press
[F2]
to call up the BIOS setup of the server blade.
Ê
In the BIOS setup menu select the
Boot
submenu and enable
Boot from CD-
ROM Drive
.
Ê
Press
[ESC]
twice and select
Exit Saving Changes
from the Exit menu.
Once the server blade has booted from the
ServerView Installation Manager
CD,
the startup screen is displayed.
