BACnet
®
Gateway for VRF System
INSTRUCTION MANUAL r1.3.2 eng
93/103
Copyright© 2010-2017 Fujitsu General Limited - All rights reserved
8.4.3 Fujitsu VRF
Set the Fujitsu VRF parameters
Figure 8.7
Fujitsu VRF interface configuration
1. Unit Address:
Enter the BACnet
®
gateway unit address of LON (values from 92 to 95 with no duplication
within the same VRF network).
2. Temperature Mode:
Enter the desired temperature units to be used (Celsius or Faherenheit).
3. Add Air Unit Manually:
Use this option to introduce units manually in the configuration.
Figure 8.8
Add units manually
4. Scan Air Units:
Use this function to scan the VRF network automatically to look for the current units connected to the system.
Note
: Scan may take from 5 to 6 minutes depending on each installation specs.
1
2
3
4