background image

25

G e t t i n g   t o   K n o w   Y o u r   L i f e B o o k

launch with this button, and then click OK. The button 
will now launch the new application.

The Internet tab is different. It comes set to launch your 
Windows default Internet browser (Internet Explorer), 
unless you have changed this in Windows. In order to 
reconfigure it to launch another program follow these 
easy steps:

1. Select “Start Other Program” from the “Specify the 

button action:” box. 

2. Click on [Browse] or [Go to Start Menu...].

3. Scroll down the list of applications, and then click 

on the application you wish to launch with this 
button.

4. Click [OK]. 

The button will now launch the new application. If you 
want to return to launching your Windows default 
Internet browser with this button, you need only click 
on “Default Internet Browser” from the Internet 
browser box. Be aware that you will erase the settings for 
the “other application”. If you wish to go back to 
launching the “other application” from this button, you 
will need to reconfigure it as described above

.

When you have finished with Application Panel Setup 
click OK, and the new settings will take effect. You can 
reconfigure your LifeBook Application Panel as often as 
you like.

Deactivating and Activating 
the LifeBook Application Panel

To deactivate the LifeBook Application Panel, follow 
these easy steps:

1. Click on [Start].

2. Click on Programs.

3. Click on LifeBook Application Panel.

4. Click on Stop Application Panel.

To reactivate, follow the same procedure, except for
step 4. Click on Restart Application Panel instead

.

If your system has dedicated one of the 
application launcher buttons to be an 
Internet launcher, the button can still be 
configured to launch any application you 
wish, not just an Internet browser.

Every time you start Windows the 
LifeBook Application Panel is activated, 
even if you deactivated it before you shut 
down.

B Series.book  Page 25  Friday, May 19, 2006  3:00 PM

Summary of Contents for B6210 - LifeBook - Core Solo 1.2 GHz

































































































































Reviews: