Fujitsu B27-9 TE QHD Operating Manual Download Page 39

Page: 39 / 54

Notes on the program "DisplayView"

DisplayView

is a program for Microsoft Windows operating systems, which provides the user with

a simple user interface for adapting functions that are normally assigned to the OSD.

Changes to brightness, contrast, image position and other default monitor
settings can be made easily and intuitively.

The program also supports extended functions such as Auto-Rotation and Desktop Partitioning.

Your device may differ from the described scope of function in some areas.

Brightness/Contrast

Mode

Rotation

Desktop Partitioning

Presence Sensor

Profiles

Information

Connected displays

Brightness/Contrast

Display1

Display2

Brightness

Contrast

Black level

Sharpness

100

Auto brightness

Apply settings to all connected monitors

Undo

Brightness/Contrast

DisplayView

Can be downloaded here:

"www.fujitsu.com/fts/displayview"

Function overview:

•

OSD management for screens equipped with DDC/CI

•

OSD direct access for quick changes

•

Settings for power saving mode and security settings for the presence sensor
(only for models with presence sensor)

•

Automatic rotation and partitioning of screen contents

•

Supports analogue and digital monitor ports

•

Supports up to 4 monitors

•

Supports the Microsoft Windows 10 operating system

Fujitsu

Summary of Contents for B27-9 TE QHD























































Search results

Summary of Contents for B27-9 TE QHD

Reviews:

Related manuals for B27-9 TE QHD

Brands by name

Popular brands

Fujitsu B27-9 TE QHD, Operating Manual

Search results

Summary of Contents for B27-9 TE QHD

Reviews:

Related manuals for B27-9 TE QHD

Brands by name

Popular brands