Fujitsu b2178 Manual Download

Page: 30 / 89

6. Turning on the Power

Notes on Putting the Power On

SECTION 1

This section explains the normal procedure to turn on the power.

When the power is On, do not carry the PC around, or subject it to shocks or vibration, as you
risk damaging your PC.
If you turn on the power to the PC when it is connected with FDD unit, remove a floppy disk if
any is inserted in the drive.

How to Put the Power On

Open the LCD Display

Latch

Press the front latch to unlock and open the
LCD Display.

Connect the AC adapter to your PC.

(1)Connect the cord of the AC adapter.
(2) Connect the adapter to the DC-IN connector
on the PC unit.
(3) Connect the plug to a socket.

Turn on the MAIN switch of the PC.

MAIN switch

Power will be supplied and POST will start.
Status indicator LCD such as (

) will turn

On.

DC-IN Connector

Quilt Sec 1_17-21

17/10/2000, 15:36

Summary of Contents for b2178


























































































Search results

Summary of Contents for b2178

Reviews:

Related manuals for b2178

Brands by name

Popular brands

Fujitsu b2178, Manual

Search results

Summary of Contents for b2178

Reviews:

Related manuals for b2178

Brands by name

Popular brands