Fujitsu AUTG09LVLB, Design & Technical Manual

Page: 33 / 58

- 29 -
CASSETTE TYPE A
U
T
G
09-
12
LV
LB
STEP 2: Selecting the function number and setting value
!
CAUTION
After turning off the power, wait 30 seconds or more before turning on the power again. The
function setting will not become active unless the power is turned off then on again.
1. Press the SET TEMP. ( ) ( ) buttons to select the function number. To
switch between the left and right digits, press the MODE button.
2. Press the FAN button to proceed the setting value. To return the function
number selection, press the FAN button again.
3. Press the SET TEMP. ( ) ( ) buttons to select the setting value. To
switch between the left and right digits, press the MODE button.
4. Press the TIMER MODE button, and START/STOP button, in the order
listed to confirm the settings.
5. Press the RESET button to cancel the function setting mode.
6. After completing the function setting, be sure to turn off the power and
turn it on again.
Function number
Setting value