background image

En-14

Air Cleaning Filter Installation

1. Open the Intake Grille and remove the Air 

fi

 lters.

2. Install the Air cleaning 

fi

 lter set (set of 2).

1

 Set the air cleaning 

fi

 lter into the air cleaning 

fi

 lter frame.

2

 Engage the latch at both ends of the filter with the 2 

hooks at the rear of the air cleaning 

fi

 lter frame.

Take care that the air cleaning 

fi

 lter does not project beyond 

the frame.

3

 Engage the 6 

fi

 xing locations at the top and bottom of 

the air cleaning 

fi

 lter frame with the hooks of the air 

fi

 l-

ter.

3. Install the 2 Air filters and close the 

Intake Grille.

  When air cleaning 

fi

 lters are used, the effect will increased 

by setting the fan speed to “High”.

Replacing dirty Air cleaning 

fi

 lters

Replace 

fi

 lters with the following components (purchased sep-

arately).

  POLYPHENOL CATECHIN AIR CLEANING FILTER : UTR-FA13-1

  Negative air ions deodorizing 

fi

 lter: UTR-FA13-2

1. Open the Intake Grille and remove the Air 

fi

 lters.

2. Replace them by 2 new Air cleaning 

fi

 lters.

1

 Remove the old air cleaning 

fi

 lters in reverse order of 

their installation.

2

 Install in the same way as for installation of the air 

cleaning 

fi

 lter set.

3. Install the 2 Air filters and close the 

Intake Grille.

In regard to the Air Cleaning Filters

POLYPHENOL CATECHIN AIR CLEANING FILTER (1 sheet)

  The Air Cleaning Filters are disposable 

fi

 lters. (They can not 

be washed and reused.)

 For storage of the Air Cleaning Filters, use the filters as 

soon as possible after the package has been opened.

  (The air cleaning effect decreases when the 

fi

 lters are left in 

the opened package)

 Generally, the filters should be exchanged about every 

3 months.

Please buy delicated air cleaning 

fi

 lters (UTR-FA13-1) (Sold 

separately) to exchange the used dirty air cleaning 

fi

 lters. 

[Negative air ions deodorizing 

fi

 lter (1 sheet) — light blue]

 The 

fi

 lters should be exchanged about every 3 years so as 

to maintain the deodorizing effect.

  Filter frame is not a one-off product.

Please buy delicated deodorizing 

fi

 lter (UTR-FA13-2) (Sold 

separately) when exchanging the 

fi

 lters.

Maintenance of Deodorizing Filters

In order to maintain the deodorizing effect, please clean the 

fi

 lter in the follow way once 3 months.

1

 Remove the deodorizing 

fi

 lter.

2

 Clean with water and dry in the air.

1) Flush the 

fi

 lters with high-pressure hot water until the 

surface of the 

fi

 lters are covered with water. Please 

fl

 ush with diluent neutral detergent. 

  Never wash by reaming or rubbing, otherwise it 

will damage the deodorizing effect.

2) Rinse with water 

fl

 ow.

3) Dry in shade. 

3

 Reinstall the deodorizing 

fi

 lter.

Hook (2 places at the rear)

Latch (2 places)

CLEANING AND CARE

Air Filter (Right & Left)

Air cleaning 

fi

 lter frame

Air cleaning 

fi

 lter

Air cleaning 

fi

 lter set

Air Filter (Right & Left)

Air Filter (Right & Left)

Air Filter (Right & Left)

Rear of the 

fi

 lter

Fixing location, hook (6 places)

9315345516_OM.indb   14

9315345516_OM.indb   14

9/27/2012   1:52:24 PM

9/27/2012   1:52:24 PM

Summary of Contents for ASY71UI-LF




















Reviews: