background image

En-9

SLEEP TIMER OPERATION

Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped.

To Use the SLEEP Timer

While the air conditioner is operating or stopped, press the 
SLEEP button (Fig. 5 

J

).

The indoor unit’s OPERATION Indicator Lamp (green) (Fig. 3 

5

) lights and the TIMER 

Indicator Lamp (orange) (Fig. 3 

6

) light.

To Change the Timer Settings

Press the SLEEP button (Fig. 5 

J

) once again and set the 

time using the TIMER SET ( 

 / 

 ) buttons (Fig. 5 

R

).

Set the time while the Timer Mode Display is 

fl

 ashing (the 

fl

 ashing will continue about 5 

seconds).

 button: 

Press to advance the time.

 button: 

Press to reverse the time.

About 5 seconds later, the entire display will reappear.

To Cancel the Timer:

Use the TIMER MODE button to select 
“CANCEL”.
The air conditioner will return to normal 
operation.

To Stop the Air Conditioner During 
Timer Operation:

Press the START/STOP button.

About the SLEEP Timer

To prevent excessive warming or cooling during sleep, the SLEEP timer function automatically modi

fi

 es the thermostat setting in ac-

cordance with the set time setting. When the set time has elapsed, the air conditioner completely stops.

During Cooling/Dry operation:

When the SLEEP timer is set, the thermostat setting is automati-
cally raised 1 °C every 1 hour. When the thermostat has been 
raised a total of 2 °C, the thermostat setting at that time is main-
tained until the set time has elapsed, at which time the air condi-
tioner automatically turns off.

SLEEP timer setting

During Heating operation:

When the SLEEP timer is set, the thermostat setting is 
automatically lowered 1 °C every 30 minutes. When the thermo-
stat has been lowered a total of 4 °C, the thermostat setting at 
that time is maintained until the set time has elapsed, at which 
time the air conditioner automatically turns off.

SLEEP timer setting

2 °C

3 °C

4 °C

30
minutes

1 °C

1 hour

1 hour

30 minutes

Set time

Set temp.

Set time

1 hour

1 °C

2 °C

Set temp.

9315345516_OM.indb   9

9315345516_OM.indb   9

9/27/2012   1:52:23 PM

9/27/2012   1:52:23 PM

Summary of Contents for ASY71UI-LF




















Reviews: