background image

En-3

Remote controller

Remote controller holder

Tapping screws

Batteries

Remote controller holder installation

1

2

3

Slide up 

Screws

Insert

2.1.  Inserting batteries

Battery type: R03/LR03/AAA × 2

4

1

3

2

1~3.

 Put batteries as shown in the figure above.

4. 

Press 

 as shown in the figure above.

NOTES:

• 

Use specified type of batteries only. 

• 

Do not mix different types or new and used batteries together.

• Batteries can be used about 1 year in ordinary use.

• If the remote control range noticeably shortens, replace the 

batteries, and press 

 as shown in the figure above.

3.  NAME OF PARTS

 

CAUTION

For appropriate signal transmission between the remote 

controller and the indoor unit, keep the signal receiver 

away from the following items:

 - Direct sunlight or other strong lights

 - Flat-panel television screen

In rooms with instantaneous fluorescent lights, such as 

inverter type ones, the signal may not be transmitted 

properly. In such a case, consult the store of purchase.

3.1.  Indoor unit

Indicator lamps 

*2)

Remote control 

signal receiver

Intake grille 

*1)

Vertical louvers

Drain hose

Air filter

Rating label

Front panel

For Manual Auto operation 

and Filter indicator reset

(Refer to page 10.)

*1) Before starting operation, make sure that the intake grille is closed 

completely. Incomplete closing may affect the proper function or 

performance of the product.

*2) Indicator lamps light in the following conditions.

Name

Color

Operation or condition

Operation

Green

Normal operation

Timer

Orange

Timer operation

Economy

Green

Economy operation

3.2.  Remote controller

 

 CAUTION

•  To prevent malfunction or damage of the remote 

controller:

 -  Place remote controller at where will not be exposed 

to direct sunlight or excessive heat.

 -  Remove batteries if the product is not going to be used 

for an extended period.

•  Obstacles such as a curtain or wall between the 

remote controller and the indoor unit may affect the 

appropriate signal transmission.

•  Do not apply strong shocks to the remote controller.

•  Do not pour water on the remote controller.

When you use the optional remote controller, the appearance 

and the operation procedure may differ.

 

For details, refer to the operation manual of each remote 

controller.

 

 CAUTION

• 

If leaking battery fluid comes in contact with your skin, 

eyes, or mouth, immediately rinse with plenty of clean 

water, and consult your physician.

•  Exhausted batteries must be removed immediately, 

and be disposed according to the local laws and 

regulations of your region.

•  Do not attempt to recharge dry batteries.

•  Do not use dry batteries that has been recharged.

Indoor unit accessories

Check that the following accessories are included.

9333892030-02_OM_EN.indd   3

9333892030-02_OM_EN.indd   3

01/27/2022   08:35:02

01/27/2022   08:35:02

Summary of Contents for ASTH07KNCA













Reviews: