Fujitsu ASTG24JF, Operating Manual

Page: 7 / 18

En-6
To Select Mode Operation
1
Press the START/STOP button (Fig.5
L
).
The indoor unit’s OPERATION Indicator Lamp (green) (Fig. 3
5
) will light.
The air conditioner will start operating.
2
Press the MODE button (Fig.5
G
) to select the de-
sired mode.
Each time the button is pressed, the mode will change in the following order.
▲ ▲ ▲ ▲
AUTO COOL DRY FAN
About 3 seconds later, the entire display will reappear.
To Set the Thermostat
Press the SET TEMP. button (Fig. 5
P
).
button: Press to raise the thermostat setting.
button: Press to lower the thermostat setting.
●
Thermostat setting range:
AUTO ....................................18 - 30 °C
Cooling/Dry ...........................18 - 30 °C
The thermostat cannot be used to set room temperature during the FAN mode (the tem-
perature will not appear on the Remote Controller’s Display).
About 3 seconds later, the entire display will reappear.
The thermostat setting should be considered a standard value, and may differ
somewhat from the actual room temperature.
To Set the Fan Speed
Press the FAN button (Fig. 5
K
).
Each time the button is pressed, the fan speed changes in the following order:
▲ ▲ ▲ ▲ ▲
AUTO HIGH MED LOW QUIET
About 3 seconds later, the entire display will reappear.
When set to AUTO:
Cooling :
As the room temperature approaches that of the thermostat setting, the
fan speed becomes slower.
Fan : The fan runs at the low fan speed.
The fan will operate at a very low setting during Monitor operation.
SUPER QUIET Operation
When set to Quiet:
SUPER QUIET operation begins. The indoor unit’s air ow will be reduced for quieter
operation.
●
SUPER QUIET operation cannot be used during Dry mode. (The same is true when
dry mode is selected during AUTO mode operation.)
●
During SUPER QUIET operation, Cooling performance will be reduced somewhat. If
the room does not cool down when using SUPER QUIET Operation, please adjust
the air conditioner’s Fan Speed.
Example: When set to COOL.
Example: When set to 26 °C.
Example: When set to AUTO.
OPERATION
9315345509_OM_EN.indb 6 2012-7-17 17:16:56