Fujitsu AOY12ASQT, Operating Manual

Page: 6 / 20

En-3
Fig. 1 Indoor Unit
1 Operating Control Panel (Fig. 2)
2
MANUAL AUTO button
3 Remote Control Signal Receiver
4
Indicator Lamps (Fig. 3)
5
OPERATION Indicator Lamp (red)
6 TIMER Indicator Lamp (green)
●
If the TIMER indicator lamp flashes when
the timer is operating, it indicates that a
fault has occurred with the timer setting
(See Page 13 Auto Restart).
7 SWING Indicator Lamp (orange)
8
Intake Grille (Fig. 4)
9 Air Filter
0 Air Flow Direction Louver
A
Right-Left Louver
(behind Air Flow Direction Louver)
B
Drain Hose
C Power Supply Plug
D Power Supply Cord
E
Air Cleaning Filter (optional)
Fig. 5 Outdoor Unit
F
Intake Port
G
Outlet Port
H Pipe Unit
Fig. 6 Remote Control Unit
I SLEEP button
J
MASTER CONTROL button
K
SET TEMP. button ( / )
L Signal Transmitter
M OFF TIMER button
N
ON TIMER button
O
SET TIMER button
P
CANCEL TIMER button
Q FAN CONTROL button
R START/STOP button
S
AIR FLOW DIRECTION button
T
SWING LOUVER button
U ACL button
V TEST RUN button
●
This button is used when installing the
conditioner, and should not be used un-
der normal conditions, as it will cause the
air conditioner’s thermostat function to op-
erate incorrectly.
●
If this button is pressed during normal op-
eration, the unit will switch to test opera-
tion mode, and the Indoor Unit’s OPERA-
TION Indicator Lamp and TIMER Indicator
Lamp will begin to flash simultaneously.
●
To stop the test operation mode, press the
START/STOP button to stop the air condi-
tioner.
W
Remote Control Unit Display (Fig. 7)
X
Transmit Indicator
Y Operating Mode Display
Z Timer Mode Display
OFF TIMER Mark:
ON TIMER Mark:
SLEEP TIMER Mark:
[ Fan Speed Display
\ Te m p e r a t u r e a n d t i m e d i s p l a y
It displays the temperature setting. How-
ever, when making the Timer setting, it will
display the Timer time. (The temperature
setting will reappear after finishing the
timer setting)
NAME OF PARTS