En-2
(9) Intake grille
(10) Front panel
(11) Air
fi
lter
(12) Vertical air
fl
ow direction louver
(13) Horizontal air
fl
ow direction louver (behind Air
fl
ow Direction Louver
and Damper)
(14) Damper
(15) Air cleaning
fi
lter
(16) Rope
(17) Drain Hose
Control unit (optional)
Types of remote controllers:
●
Wireless remote controller
●
Wired remote controller
●
Simple remote controller
For operation method, please refer to the Operating Manual of each
device.
MANUAL AUTO OPERATION
Use the MANUAL AUTO operation in the event the remote control unit is
lost or otherwise unavailable.
CAUTION
Do not press the MANUAL AUTO button with wet hands or pointed ob-
jects, otherwise an electric shock or malfunction may occur.
Starting Operation
Press the MANUAL AUTO button on the operating
control panel.
The operation can be set in the following setting.
Operating mode
AUTO:
When Auto mode cannot be selected, it will
operate in the same mode as the other indoor
unit in the same system. (When other indoor
unit in the same system doesn’t operate, the air
conditioner will operate in cooling.)
Fan speed
AUTO
Setting temperature
74°F (23°C)
Stopping Operation
Press the MANUAL AUTO button on the operating
control panel.
AIRFLOW DIRECTION
Vertical air
fl
ow direction
The vertical wind direction can
be controlled with the remote
controller.
1
2
3
4
Cooling, Dry
and Heating
Horizontal air
fl
ow direction
The horizontal air
fl
ow direction can be manually set by adjusting horizon-
tal air
fl
ow direction louvers.
CAUTION
Always adjust the horizontal air
fl
ow direction louvers when the damper
is open. Opening the damper forcibly with hands can cause damper to
malfunction.
AIR OUTLET SELECTION
With this function , air come out simultaneously from the upper and lower
air outlets so that the room can be cooled or heated effectively. This
function is set using the switch behind the front grille of the Indoor unit.
(This function is available in cooling and heating operation.)
How to set the out air outlet
Upper air outlet only
Upper and lower air outlets
Set the air outlet
selection switch to
Set the air outlet
selection switch to
Air blows out automatically from
the upper and lower air outlets as
shown in the table below.
NOTES:
Set the air outlet selection switch to the end. Otherwise, air outlet cannot
be selected as intended.
Description of operation
(When set to the upper and lower air outlets)
Cooling mode
Dry mode
Heating mode
Upper and
lower air
fl
ow
Upper air
fl
ow
Upper air
fl
ow
only
Upper and
lower air
fl
ow
Upper air
fl
ow
Room temper-
ature and set
temperature
are different.
Room tem-
perature is
close to set
temperature,
or the air
conditioner has
operated for 1
hour.
―
Air
fl
ow
temperature is
high.
Air
fl
ow tem-
perature is low.
(During
defrosting
operation, start
of operation,
etc.)
9382567033-01.indb 2
9382567033-01.indb 2
11/21/2017 3:38:40 PM
11/21/2017 3:38:40 PM
