background image

En-13

WARNING

In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off the electrical 
breaker, and consult authorized service personnel.
Merely turning off the unit’s power switch will not completely disconnect the unit from the power source. 
Always be sure to turn off the electrical breaker to ensure that power is completely off.

Before requesting service, perform the following checks:

TROUBLESHOOTING

Symptom

Problem

See Page

NORMAL 

FUNCTION

Does not operate immedi-
ately:

 

  If the unit is stopped and then immediately started again, the com-

pressor will not operate for about 3 minutes, in order to prevent fuse 
blowouts.

 

  Whenever the electrical breaker is turned off then on again, the protec-

tion circuit will operate for about 3 minutes, preventing unit operation 
during that period.

Noise is heard:

 

  During operation and immediately after stopping the unit, the sound 

of water 

fl

 owing in the air conditioner’s piping may be heard. Also, 

noise may be particularly noticeable for about 2 to 3 minutes after 
starting operation (sound of coolant 

fl

 owing).

 *

 

During heating operation, a sizzling sound may be heard occasionally. 
This sound is produced by the automatic defrosting operation.

14

Smells:

 

  Some smell may be emitted from the indoor unit. This smell is the 

result of room smells (furniture, tobacco, etc.) which have been taken 
into the air conditioner.

Mist or steam are emitted:

 

  During cooling or dry operation, a thin mist may be seen emitted from 

the indoor unit. This results from the sudden cooling of room air by 
the air emitted from the air conditioner, resulting in condensation and 
misting.

 *

 

During heating operation, the outdoor unit’s fan may stop, and steam 
may be seen rising from the unit. This is due to the automatic defrost-
ing operation.

14

Air

fl

 ow is weak or stops:

 *

  When heating operation is started, fan speed is temporarily very low, 

to allow internal parts to warm up.

 *

 

During heating operation, if the room temperature rises above the 
thermostat setting, the outdoor unit will stop, and the indoor unit will 
operate at very low fan speed. If you wish to warm the room further, 
set the thermostat to a higher setting.

 *

 

During heating operation, the unit will temporarily stop operation (be-
tween 4 and 15 minutes) as the automatic defrosting mode operates. 
During the automatic defrosting operation, 

 will be shown on the 

remote controller display.

14

 

  The fan may operate at very low speed during dry operation or when 

the unit is monitoring the room’s temperature.

 

 In the monitor AUTO operation, the fan will operate at very low 

speed.

Water is produced from the 
outdoor unit:

 *

 During heating operation, water may be produced from the outdoor 

unit due to the automatic defrosting operation.

14

The FILTER indicator 
blinks:

 

 Clean the 

fi

 lter. Afterwards, turn the FILTER indicator off.

12

  thermo sensor display 

on the remote controller is 

fl

 ashing:

 

  The room temperature sensor may be malfunctioning. Please consult 

authorized service personnel.

CHECK ONCE

MORE

Does not operate at all:

 

  Has the circuit breaker been turned off?

 

  Has there been a power failure?

 

  Has a fuse blown out, or a circuit breaker been tripped?

 

  Is the timer operating?

Poor cooling (or heating*) 
performance:

 

  Is the air 

fi

 lter dirty?

 

  Are the air conditioner’s intake grille or outlet port blocked?

 

  Did you adjust the room temperature settings (thermostat) correctly?

 

  Is there a window or door open?

 

  In the case of cooling operation, is a window allowing bright sunlight 

to enter? (Close the curtains.)

 

  In the case of cooling operation, are there heating apparatus and com-

puters inside the room, or are there too many people in the room?

If the problem persists after performing these checks, or if you notice burning smells, stop operation immediately, disconnect the power 
supply, and consult with authorized service personnel.

Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).

9374379552-02_OM.indb   Sec2:13

9374379552-02_OM.indb   Sec2:13

2012/3/29   下午 04:47:30

2012/3/29   下午 04:47:30

Summary of Contents for ACY140HUIAT-LH

















Reviews: