Fujitsu 9811 ATB, Operator'S Manual, Page: 7 / 22

Operating the Printer
Continued 1Normal Operating Messages.
Description
LCD message LED B.Z. C.f. E-Code
Recovery
The stacker (exit hopper) is full of tickets. Exit hopper full
ERROR ON O A-8500
Remove the tickets from the stacker (exit hopper).
Boarding print has been started.
Host check-in
started.
- - -
Inserted ticket was held or jammed at insterter path.
Inserted doc.
pulled out
ERROR ON O A-810B
Remove the (jammed) ticket.
Jam occurred at pre-feed path1 (1
st
slot, Bin1).
Jam in prefeed1
ERROR ON H A-8101
Remove the jammed tickets.
Jam occurred at pre-feed path2 (2
nd
slot, Bin3).
Jam in prefeed2
ERROR ON H A-8102
Remove the jammed tickets.
Jam occurred at pre-feed path3 (3
rd
slot, Bin2).
Jam in prefeed3
ERROR ON H A-810C
Remove the jammed tickets.
Jam occurred at the path from pre-feed to print unit.
JAM at path from
MS to print area
ERROR ON H A-8103
Remove the jammed tickets.
Jam occurred at the path from inserter to escape
JAM at path from
inserter
ERROR ON H A-8104
Remove the jammed tickets.
Jam occurred at the eject path to the inserter.
JAM at ejc. Path
to inserter
ERROR ON H A-8105
Remove the jammed tickets.
Jam occurred at the escape path.
JAM at path to
escape area
ERROR ON H A-8106
Remove the jammed tickets.
Jam occurred at the printer unit.
JAM error
during print
ERROR ON H A-8107
Remove the jammed tickets.
Jam occurred at eject path to exit hopper (stacker).
JAM at ejc. Path
to exit hopper
ERROR ON H A-8108
Remove the jammed tickets.
The jammed ticket was not removed yet.
JAM occurred.
ERROR ON H A-8100
Remove the jammed tickets.
SCN cannot be read (for ticketing).
MS read error
No data on MS
ERROR ON H/C A-8320 Check whether the ticket is normal (ATB coupon).
If normal, call maintenance personnel.
Under the off line mode.
Off line
- - -
Push key “ON/OFF” to turn the mode to ON-LINE.
Waiting for pulling out ticket from front inserter.
Please pull out
ticket.
- ON -
Pull out the ticket.
Ticket print out correctly.
Print
successful
- - -
On idling (waiting for receiving print data from host)
Ready to accept
ticket…
- - -
Data was not received correctly.
Receive error
occurred
ERROR ON C E-01xx
Check the host data.
Ribbon has come to end.
Ribbon end
ERROR ON O A-8800
Change to new ribbon.
Ribbon has come to near end (less than 150 printing).
Ribbon near end
FORM
(blink)
- O -
Prepare new ribbon.
Ribbon is not installed in thermal transfer print.
Ribbon not
installed
ERROR ON O A-8900
Install the ribbon if you use in thermal transfer mode.
Ribbon is installed in direct print mode.
Ribbon installed
ERROR ON O A-8A00
Remove ribbon if you use direct thermal mode.
Ribbon was not wound up.
Ribbon wind error
ERROR ON H A-8D00
Try to change the ribbon or re-install it correctly.
Any previous error was not cleared.
Ticket JAM
ERROR ON H A-9000
Check any JAM and try to open and close the cover (door).
Ticket was inserted in revalidation mode.
TKT inserted
do revalidation.
- - -
On ticketing.
Ticketing
started
- - -
Magnetic Stripe encoding error occurred (after retried 2 times).
Too many
MS encode retrys
ERROR ON H/O A-822x
Try to clean the magnetic head. (Use the cleaning card.)
SCN cannot be read (for ticketing).
Too many stock
nr read errors
ERROR ON H/O A-832x Check whether the ticket is normal (ATB coupon).
If normal, call maintenance personnel.
Data could not be transmitted correctly.
Transmit error
Occurred
ERROR ON C E-1xxx
Check the host data.
6