En-12
REMOVING THE INTAKE GRILLE
(1) Slide the two grille stoppers inward, then open the intake grille.
(2) Remove the grille hook screws, then open the intake grille. (Fig. 19)
(3) Open the intake grille so that it is at an angle of 20° to 40°, then remove the grille.
Fig. 19
Grille hook
CAUTION
1
The louver angle cannot be changed if the power is not on, (If moved by hand, it may be damaged.)
2
The grille assembly is directional relative to the air conditioner body.
3
Install so that there is no gap between the grille assembly and the air conditioner body.
