manualshive.com logo in svg

Fujitsu 690Tx, User Manual

The Fujitsu 690Tx offers advanced technology and unmatched performance. Its user-friendly interface allows for intuitive navigation and seamless operation. Enhance your experience with the comprehensive User Manual, available for free download at manualshive.com. Unlock the full potential of your device and enjoy hassle-free operation with this essential manual.

Share
Download
background image

C A U T I O N

Be careful not to scratch the infrared port
lens. Scratches, dirt or other surface
marks can effect operation.

S e c t i o n   T w o

50

C A U T I O N

Your internal modem is designed to allow
faster downloads from K56flex compliant
digital sources. Maximum achievable
download transmission rates may not re a c h
56 Kbps and will vary with line conditions.

C A U T I O N

Do not move either device during
communication as it may interrupt
data transmission.

INFRARED PORT

Infrared IrDA-compatible communication
is a function that allows for wireless data 
transfer between your notebook and other
IrDA-compatible devices. Examples of IrDA-
compatible devices are another computer
or a printer. When carrying out this kind of
communication, both devices must be set so
their infrared ports are directly facing each
other without obstructions.A distance of 6" 
to 36" between the device ports is ideal. Dirt
or scratches on the lens of your notebook or
the other device will degrade performance.
This is especially true for Fast IrDA applica-
tions such as a transfer to an Ethernet.

LapLink software can be used for Infrared
file transfers. See your online help for
more information.

The following conditions may interfere with
infrared communications:

■

When the infrared communication ports
are not directly facing each other, or some
obstacle is between them.

■

When the infrared communication ports are
too far apart.

■

When a television or radio remote control
unit, or a wireless headphone is being
used nearby.

■

When a strong light such as direct sunlight,
fluorescent light, or incandescent light shines
on the port.

PRE-INSTALLED SOFTWARE

Your LifeBook 600 Series comes with pre-
installed software for playing audio and video
files of various formats. In addition there is file
transfer software, telephony software and virus
protection software. Some models come with
additional application software.

Summary of Contents for 690Tx








































































































































































































Reviews:

No comments

Related manuals for 690Tx

Gateway NV52L Quick Start Manual preview
NV52L
Brand: Gateway Pages: 31
Gateway MX6111m Documentación Del Hardware preview
MX6111m
Brand: Gateway Pages: 64
Gateway MX6002m Guía De Referencia preview
MX6002m
Brand: Gateway Pages: 174
Gateway MT6704h Manual D'Installation preview
MT6704h
Brand: Gateway Pages: 2
Gateway MX6212j User Manual preview
MX6212j
Brand: Gateway Pages: 220
Gateway MT6228j Reference Manual preview
MT6228j
Brand: Gateway Pages: 146
Gateway MT6015j Reference Manual preview
MT6015j
Brand: Gateway Pages: 156
Gateway MT6221jb Reference Manual preview
MT6221jb
Brand: Gateway Pages: 134
Gateway ML6227v Príručka Pre Používateła preview
ML6227v
Brand: Gateway Pages: 114
Gateway ML6227q Felhasználói Kézikönyv preview
ML6227q
Brand: Gateway Pages: 114
Gateway ML6227z Referenční Příručka preview
ML6227z
Brand: Gateway Pages: 162
Gateway ML6227q Referencia Kézikönyv preview
ML6227q
Brand: Gateway Pages: 164
Gateway MT6704h Manual Du Matériel preview
MT6704h
Brand: Gateway Pages: 160
Gateway MD24 Reference Manual preview
MD24
Brand: Gateway Pages: 150
Gateway M675 Replacement Manual preview
M675
Brand: Gateway Pages: 8
IBM ThinkPad i Series Setup Manual preview
ThinkPad i Series
Brand: IBM Pages: 5
IBM Thinkpad X30 Series User Manual preview
Thinkpad X30 Series
Brand: IBM Pages: 22
IBM ThinkPad 600X? Quick Reference preview
ThinkPad 600X?
Brand: IBM Pages: 2

Brands by name

Popular brands

Load more brands