Fujitsu 690Tx User Manual Download Page 15

Page: 15 / 199

S e c t i o n O n e

■

Hot swap PS/2 connection for an external
keyboard and an external mouse.

■

Serial port.

■

Parallel port.

■

External Monitor port.

■

DC Power jack.

■

Full audio and video features:

■

16-bit SoundBlaster-compatible
sound chip.

■

3D-Stereo for multiple speaker effects.

■

3D-Graphics for fast graphic rendering.

■

Zoomed Video support for full motion
video acceleration.

■

Built-in mono speaker.

■

Built-in mono microphone.

■

Stereo Line In jack.

■

Stereo Headphone jack.

■

Microphone jack.

■

Two Type II/one Type III PC Card slots.

■

Fast IrDA (4Mbps) compatible infrared port
for wireless data transfer.

■

External monitor support with simultaneous
display capabilities.

■

“No re-learning”, full-size keyboard with
three dedicated Windows 95 keys.

■

Dual USB device support.

■

Standard pre-installed software:

■

Microsoft Windows 95 operating system
with Internet Explorer 4.01.

■

LapLink from Traveling Software for
file transfers via modem,cable or
infrared port.

■

PC-Doctor for system diagnostics.

■

SoftPEG from CompCore for MPEG-1
video playing.

■

McAfee VirusScan for virus protection.

■

ESS AudioRack for 3D-Stereo, audio CD,
and other audio controls.

■

MegaPhone by AVEO for telephone
applications including fax,
dialing, and speakerphone.

■

PowerPanel by Phoenix Technologies for
power conservation management.

■

Standard user-install software.

■

Netscape Communicator 4.0.

■

America Online 3.0 Free Trial.

■

JFAX Telecom Software.

■

AT&T Worldnet Service.

Figure 1-5 Top and Front Panel

Summary of Contents for 690Tx








































































































































































































Search results

Summary of Contents for 690Tx

Reviews:

Related manuals for 690Tx

Brands by name

Popular brands

Fujitsu 690Tx, User Manual

Search results

Summary of Contents for 690Tx

Reviews:

Related manuals for 690Tx

Brands by name

Popular brands