manualshive.com logo in svg

Fujitsu 50FH5037E-02, Oem Manual

Share
Download
Fujitsu 50FH5037E-02 Oem Manual Download Page 53

Table 6.1 shows the meaning of the response data and its code (indicated in
hexadecimal).

Table 6.1 Response data

Code (Hex)

Meaning

Response data

Reception
error

Parity error

A parity error has been detected in received
data.

Flaming error
Overrun error

A flaming error or an overrun error has
been detected in received data.

Count error

The byte count for the command or
response does not match the number of
bytes transferred.

ACK (Acknowledge)

A command or response has been received
normally.

©FFπ

©80π

©81π

©82π

6.2

Command/Response Format

The command/response format is as follows.

CNT

CMD/RPS

a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a

TEXT

Additional field

(1)

CNT (count) field

The total number of bytes in the command/response to be transmitted is
represented.

(2)

CMD/RPS field

A command or response code is indicated.

(3)

TEXT field

Additional information for a command or response, called control or device
information, is indicated.

(4)

Additional field

In some commands, additional field exists next to TEXT field.

50FH5037E

>

02

6 

$

 3

Summary of Contents for 50FH5037E-02















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands