Fujitsu 12RL2 Manual Download Page 12

Page: 12 / 48

FEATURES

Feature Explanation

SEER

Seasonal Energy Efficiency Rating. Used to express efficiency of
an AC or Heat Pump. A higher rating means more efficient.

HSPF

Heating Seasonal Performance Factor, measures the efficiency
of heating portion of your heat pump.

ENERGY STAR

Qualified

Qualified products and practices help you save money and
reduce greenhouse gas emissions by meeting strict energy
efficiency guidelines set by the U.S. Environmental Protection
Agency and the U.S. Department of Energy.

Apple Catechin Filter

(polyphenol ingredient from apples)

Dust, mold spores and microorganisms are absorbed onto the
filter by static electricity and growth is inhibited and deactivated.
3 - 12 month life expectancy, depending on environment.

Ion Deodorizing Filter

Deodorizes by decomposing absorbed odors using the oxidizing
and reducing effects of ions generated by fine ceramic particles.
3 year life expectancy. Wash to restore surface action.

Sleep Timer

Automatically adjusts the temperature while you sleep to make
you more comfortable.

24 Hour Timer

Allows for one on/off cycle during a 24 hour period.

Weekly Timer

Allows you to set on/off time twice a day and a different on/off
time by day.

Dry Mode

Helps reduce humidity levels when cooling requirements are low.

Auto Louver: Up/Down

Redirects airflow automatically with seven position up and down
motion which can be set to auto swing.

Auto Louver: 4 Way

Redirects airflow automatically with up/down and left/right motion.

Auto Fan Mode

System starts in high fan speed and automatically adjusts down-
ward as room begins to reach set temperature.

Powerful Operation

20 minutes of continuous operation at maximum airflow and
maximum compressor speed. Rapid cooling and heating makes
the room comfortable quickly.

Minimum Heat Mode

Sets room temperature to 50°F, keeping temperatures above
freezing and reducing power consumption.

Economy Mode

Thermostat setting automatically changes according to the
temperature to avoid unnecessary cooling and heating.

Energy Saver

Keeps room cool enough for comfort by using a relaxed
thermostat setting reducing power consumption.

Energy Saving Program (ESP)

If a space is left without turning the unit off, ESP knows that it is
unoccupied and 20 minutes later, temperature is adjusted
accordingly until users return to the room.

+Function is bypassed during defrost and at low speed operation. This feature may
limit cooling/heating capacity during high/low ambient conditions and increase energy
consumption as system may need to operate longer due to reduced compressor speed.

Quiet Mode (Indoor Unit)

An extra quiet fan speed to make sure you are not disturbed.

Outdoor Unit Low Noise

Limits compressor and fan speed during high speed operation
for a 3 dB noise red

Power Diffuser

An additional louver that opens based on monitoring sensors to
quickly enhance immediate comfort needs.

Auto Restart/Reset

Following a power failure, systems will automatically restart in
the same operating mode as before, once power has been
restored.

Auto Changeover

(heating to cooling or vice-versa)

Automatically alternates between heating or cooling if the room
temperature falls 4˚F below the set temperature when cooling
or rises 4˚F above set temperature when heating.*

Low Ambient Cooling

Can operate in cooling mode even when outdoor ambient is
0°F, 14°F or 32°F, depending on model, without modification.
Operation outside of factory specification is not recommended.

Cold Prevention

Indoor coil will warm prior to fan operating, preventing cold air
during heating mode.

Slender Fit

Cassette body can be moved downward into the room 1-3/8”
to accommodate limited ceiling space.

Remote Temperature Sensor

Room temperature sensor is located in optional wired remote
controller only.

Pump Down Operation

Collects all refrigerant in system back into the outdoor unit
when the unit is to be moved or before servicing the refrigerant
circuit.

Daisy Chain

Ability to connect up to 16 identical style indoor units to one
wired remote.

High Ceiling Mode

Temperature at the top of a high ceiling room may be warmer
than the space occupied; this mode adjusts for this difference.

Branch Duct Capable

Systems are capable of attaching field-supplied branch ducts
providing up to 38% of the cooling up to 16 feet away.

Fresh Air Intake

Outside air can be introduced by attaching field supplied
flexible duct to fresh air knockouts.

Base Pan Heater

Prevents condensate from freezing on the outdoor unit.

Third Party Device Control

Turns system on or off using a normally closed circuit.
Interface with third party devices such as home automation.

Warranty

Fujitsu systems come with either a 2 Year Parts / 6 Year
Compressor warranty or a 5 Year Parts / 7 Year Compressor
warranty.

*Auto Changeover is not designed to provide rapid changes between heating and
cooling operation or simultaneous heating and cooling. This feature is not
recommended for systems with more than one indoor unit unless all indoor units
have similar heating and cooling requirements and have similar temperature set
points. If all indoor units have similar heating and cooling requirements and have
similar temperature set points, auto changeover will work.

POWERFUL

50 F

POWERFUL

24 Hour

ranch

ESP