Fujitsu Siemens Computers SKP 3970-2 Series, Manual

Page: 33 / 47

U41119-J-Z126-1-74
33
6 Troubleshooting
System cannot be started
Ê Contact our Customer Service Department.
Status indicator not lit after powering up
This may have the following causes:
●
Mains voltage supply fault
●
Power supply module has been overloaded
Ê Contact our Customer Service Department.
3970-2x SKP powers itself down
●
Fault in the power supply module: The status indicator for the defective power supply
module is not lit.
●
The PDA management facility has detected a fault.
Ê Contact our Customer Service Department.
Screen remains dark
If the screen remains dark, this may have the following causes:
●
Monitor is switched off.
Ê Switch the monitor on.
●
Screen is blanked.
Ê Press any key on the keyboard.
●
Brightness control is set to dark.
Ê Turn up the monitor brightness control. Refer to the operating manual for the
monitor for detailed information.