Preparation for use and operation
Setting up the PC
8
A26361-K650-Z100-1-7619
Setting up the PC
!
When installing your PC, give consideration to the recommendations on video workstation
ergonomics in the "Safety and Ergonomics" manual.
Do not expose the PC to extreme environmental conditions (see "Technical data" chapter)
and protect it from dust, humidity and heat.
The space around the device must be at least 200 mm at the right, left, front and rear to
ensure sufficient ventilation. Do not cover the ventilation areas of the monitor, the PC or
the power adapter.
We recommend that you place your equipment on a surface with good anti-slip qualities. In view of
the multitude of different finishes and varnishes used on furniture, it is possible that the feet of the
devices will mark the surface they stand on.
The PC can be used either horizontally or vertically.
To ensure proper ventilation and stability when using the device in a vertical position, you must use
the base plate and the base feet. The On/Off switch must be positioned at the top of the device
when it is vertically orientated.