manualshive.com logo in svg

Fujitsu Siemens Computers SCENIC Edition X100, Operating Manual, Page: 34 / 65

Share
Download
Fujitsu Siemens Computers SCENIC Edition X100 Operating Manual Download Page 34

Operation

 

 

26 

A26361-K678-Z121-1-7619, edition 1 

More information on SystemLock 

i

 

If you also want to use other security software in addition to SystemLock (e.g. 
SMARTY), please read the documentation on your security software beforehand. 

SystemLock permissions 

You can initialise a SmartCard with one of the following permissions: 
System 

The system starts following entry of the user PIN. You can change the user 
PIN. 

Setup 

You can open and change the 

BIOS Setup

 and change the user PIN. 

Setup 

The system starts following entry of the user PIN. You can open and change 
the 

BIOS Setup

 and change the user PIN. 

Admin 

The system starts following entry of the user PIN. You can change the user 
PIN an the administrator PIN, unlock locked SmartCards, open and change the 

BIOS Setup

 and generate additional SmartCards for this system. 

For instructions on how to install and operate SystemLock, and how to initialise SmartCards, see the 
"BIOS Setup" manual. 

Operating the SmartCard reader 

►

 

Connect the external SmartCard reader to your system as described in the instructions for the 
SmartCard reader. 

Operating the external SmartCard reader: 

►

 

After the PC is switched on, you will be prompted to insert your SmartCard. 

Summary of Contents for SCENIC Edition X100


































































Reviews:

No comments