manualshive.com logo in svg

Fujitsu Siemens Computers SCENIC Edition X100, Operating Manual, Page: 27 / 65

Share
Download
Fujitsu Siemens Computers SCENIC Edition X100 Operating Manual Download Page 27

  

A26361-K678-Z121-1-7619, edition 1 

19 

 

Operation 

Switching on the PC 

►

 

If necessary, switch the monitor on (see the operating manual for the monitor). 

►

 

Switch the PC on with the main power switch on the rear of the PC (if present). 

►

 

Press the ON/OFF switch on the front of the PC. 

The power-on indicator lights green and the PC is started. 

Switching off the PC 

►

 

Shut down the operating system properly. For Windows: select 

Shut Down

 from the 

Start

 menu. 

►

 

If the operating system does not automatically switch the PC off, turn the PC to ready-to-
operate when requested to do so by pressing the ON/OFF switch. 

If the PC is ready-to-operate, the PC consumes very little power. 

►

 

Switch the PC off at the main switch (if present). The PC no longer uses any power. 

 

!

 

The main power switch and the power button do not disconnect the PC from the mains 
voltage. To completely disconnect the mains voltage, remove the power plug from the 
socket. 

 

►

 

If necessary, switch the monitor off (see the operating manual for the monitor). 

Placing a PC (with soft power off function) in a ready-to-operate state by means of software 

With the soft power off function the PC automatically switches off (standby) or switches into the 
energy-saving mode after the operating system is shut down. Requirements: Your system must 
support switching off with software and this functionality must be enabled in 

BIOS Setup

. The soft 

power off software may also need to be installed on Windows NT systems. 
You can also switch your PC into the standby mode via the 

DeskView

 software with the 

DeskOff 

programme. 

Summary of Contents for SCENIC Edition X100


































































Reviews:

No comments