Fujitsu Siemens Computers PRIMERGY TX120, Options Manual

Page: 31 / 61

TX120
Options Guide 31
Accessible drives Installing a backup drive
6.2 Installing a backup drive
Ê Open the server (see section “Opening the server” on page 19 ).
Ê Remove the crosspiece (see section “Removing the crosspiece” on
page 20 ).
Ê Remove the drive cage (see section “Removing the drive cage” on page 21 ).
Figure 13: Removing the protection shield from the 3.5-inch bay
Ê Grasp the protection shield through the holes and pull it out in the direction
of the arrow.
V
CAUTION!
Store the protection shield in a safe place. If the backup drive is
removed again and not replaced with a new one, then the protection
shield must be reinstalled due to cooling, the applicable EMC regula-
tions (regulations on electromagnetic compatibility) and fire
protection.