Fujitsu Siemens Computers PRIMERGY Econel 50, Operating Manual, Page: 34 / 40

Troubleshooting and tips
30
A26361-K831-Z502-1-7619
Time and/or date is not correct
You can set the time and date in the
BIOS Setup
or in the operating system.
Ê
Set the time and date.
i
If the time and date are repeatedly wrong when you switch on your server, the on-board
battery is flat. Change the lithium battery as described in the technical manual for the
D1859 system board.
Error messages on the screen
Error messages and their explanation are contained:
in the technical manual for the D1859 system board
in the "D1859 Setup Utility for Econel 50" manual
in the documentation for the programs used
Tips
The server cannot be switched off with the ON/OFF button
Cause: The server has not been switched on with the ON/OFF button.
Ê
Press the ON/OFF button again.
Cause: System crash
Ê
Press and hold the ON/OFF button for at least four seconds until the server switches off.
Out of system resources
If you have too many applications running at once, you may experience problems due to a lack of
system resources. In this case you should:
Ê
close unnecessary applications
or
Ê
run the applications in a different order
Other manuals
Other manuals are contained on the ServerBooks CD delivered with your system.