MYRICA P42-1AH / P42-2H / P50-2H
40 - English
A26361-K1064-Z120-1-M119, edition 2
Troubleshooting
Should an error occur, first check the following points. If the distortion is still not eliminated, the
plasma TV should, if possible, be checked on another signal source and/or with another data cable.
If you are unable to solve the problem, please inform our help desk.
Having this problem?
Check the following points:
No display (power indicator does not light)
►
Check whether the power cable of the
device is properly plugged in and the
ON/OFF switch on the back of the device
is switched on.
Display becomes darker
The phosphorous illumination has a limited
lifetime. If your screen display should become
too dark, it will have to be exchanged.
►
Please contact our help desk.
Permanently unlit or lit pixels
The standard of production techniques today
cannot guarantee an absolutely fault-free
screen display. A few isolated constant lit or
unlit pixels may be present. The maximum
permissible number of this kind of defective
pixels is dependent on the resolution:
6L / 10D / 10T
L = light, D = dark, T = total
No picture (power indicator glows orange)
►
Switch on the plasma TV on the device or
with the remote control.
►
Check the setting of the picture signal
source.
The remote control does not work.
►
Check whether the batteries in the
remote control are still sufficiently
charged.
►
Make sure that the sensor for the remote
control on the plasma TV is not exposed
to strong light.
