2-4
MegaRAID 320-1, -2, -2X, -4X Hardware Installation
Copyright © 2003 by LSI Logic Corporation. All rights reserved.
Figure 2.1
Inserting the MegaRAID 320 Card in a PCI Slot
Step 5.
Set the Target IDs.
Set target identifiers (TIDs) on the SCSI devices. Each device
in a channel must have a unique TID. Provide unique TIDs for
non-disk devices (CD-ROM or tapes), regardless of the channel
where they are connected. The MegaRAID 320 storage adapter
automatically occupies TID 7, which is the highest priority. The
arbitration priority for a SCSI device depends on its TID.
Table 2.1
Target ID’s
Priority
Highest
Lowest
TID
7
6
5
. . .
2
1
0
15
14
. . .
9
8
Bracket Screw
32-Bit Slots
64-Bit Slots
Summary of Contents for MegaRAID 320
