background image

MegaRAID 320 Storage Adapters User’s Guide

1-1

Copyright © 2003 by LSI Logic Corporation. All rights reserved.

 

Chapter 1
Overview

This section provides a general overview of the LSI Logic MegaRAID 320 
series of PCI-to-SCSI storage adapters with RAID control capabilities. It 
consists of the following sections. 

Section 1.1, “Overview,” page 1-1

Section 1.2, “Features,” page 1-3

Section 1.3, “Hardware,” page 1-4

1.1

Overview

The LSI Logic MegaRAID 320 storage adapters are high-performance 
intelligent Peripheral Component Interconnect to Small Computer System 
Interface (PCI-to-SCSI) host adapters with Redundant Array of 
Independent Disks (RAID) control capabilities. MegaRAID 320 storage 
adapters provide reliability, high performance, and fault-tolerant disk 
subsystem management. They are an ideal RAID solution for the internal 
storage of workgroup, departmental, and enterprise systems. 
MegaRAID 320 storage adapters offer a cost-effective way to implement 
RAID in a server. 

MegaRAID 320 storage adapters are available with one, two, or four 
SCSI channels.

The MegaRAID 320-1 storage adapter (single-channel) has one 
LSI53C1020 controller chip that controls one SCSI channel. The 
storage adapter has one very high-density cable interconnect 
(VHDCI) 68-pin external SCSI connector and one high-density cable 
interconnect (HDCI) 68-pin internal SCSI connector.

The MegaRAID 320-2 storage adapter (dual-channel) has one 
LSI53C1030 controller chip that controls two SCSI channels. The 

Summary of Contents for MegaRAID 320
















































































Reviews: