Fujitsu Siemens Computers AMILO Si 2636, Easy Manual

Page: 64 / 83

Removing and installing components during servicing
Removing and installing the hard disk
Removing the hard disk
Do not use force when installing and removing the hard disk.
The hard disk pulling aid is inserted between the hard disk and the
bottom of the ExpressCard slot.
► Switch the notebook off and pull the power plug out of the mains socket.
► Close the LCD screen so that it locks into place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stable, fl at and clean surface. If necessary, lay
a non-slip cloth on this surface to prevent the notebook from being scratched.
► Remove the battery (see "Removing the battery", Page 27 ).
Harddisk
3
2
1
1
► Remove the screws (1).
► Lift the cover off the notebook in the
direction of the arrow (2).
► Carefully pull out the pulling aid.
► Pull the hard disk out of the hard
disk compartment in a straight line
(3) along the guide rail.
54 10600903218, edition 1