background image

3

1F03 1781

  Be sure to disconnect the power plug 

from the wall outlet, or switch off the 
breaker when not using for a long 
time.

  Insulation may be deteriorated, and fire 

or electric shock may result in.

Disconnect the 

plug

Disconnect by 

holding  

the plug

 Don’t touch the filter or parts around it 

while cooking.

  The filter or parts may drop, and burn or 

injury may result in.

Using prohibited

 Assemble component parts securely.

  Injury by dropping may result in.

Assembly 

cautioned

Contact prohibited

 If the power cord is damaged, it must 

be replaced by the manufacturer, its 

service agent or similarly qualified 

persons in order to avoid a hazard.

 Switch off the cooker hood at once 

when oil caught fire while cooking.

  It’s dangerous if not stop as fire is built up.

Operation 

prohibited

Wear gloves

Prohibited

Replace the cord if 

it’s damaged

 When disconnecting the power plug, 

hold the plug itself.

  Don’t pull the cord anyway.

  The cord may be damaged, and fire or 

electric shock may result in.

Assembly 

cautioned

Contact prohibited

Contact prohibited

 Be sure to wear gloves when care and 

maintenance.

  Injury by the sharp edges or corners may 

result in.

 Ensure that electric wiring is made 

safely according to the standard or 

regulations related.

  Incorrect wiring may result in fire or 

electrical shock.

 Don’t touch the lamp cover or around 

it.

  As it becomes hot, burning may result in.

 During operation, never insert fingers 

or other objects.

  Failure or injury may result in.

 Do not put anything on the cooker 

hood.

  It may be cause of fire, failure, or injury by 

dropping.

 Never use the product in a wet 

place such as bath room, etc. (Use a 

ventilation fan for bath room.)

  It may be cause of fire or failure if used.

Name of Parts

 Preparation

Push-button switch

Lamp cover

Thermostat

Thermostat

Rectifier panel

Baffle filter

Body

Fan

Oil tray

Power plug

Exhaust outlet (1)

Washer-head wood screw
(

5.1

×

45) (4)

Mounting bracket (2)

Soft tape (1)

Accessories

Summary of Contents for GFP-600









Reviews: