Widget Associates
Fujikura FSR-02 Recoater Basic Operation Manual
Page 4 of 4
11
When the proof test is
complete, open the right
fiber clamp first, and then
open the left fiber clamp.
12
Carefully remove the fiber
by lifting the fiber up from
the right side first.
Keep the fiber taut and
straight when removing
it from the recoater.
13
Use Isopropyl Alcohol and
Kimwipes to thoroughly
clean the surface of the
mold.
14
Replace the protective
tissues under each fiber
clamp and the mold.
15
Press and hold the ON/OFF
button to shut down the
recoater.
The ON/OFF button must
be held until the SHUT
DOWN message appears.
