Widget Associates
Fujikura FSR-02 Recoater Basic Operation Manual
Page 2 of 4
3
Open the fiber clamps and
mold.
The protective tissues
must be removed from
the opened clamps
before laying fiber into
the recoater.
4
Hold the spliced fiber taut
and lay the fiber across the
recoater from left to right.
Make sure the fiber is
centered in the foam
guides at the outer ends
of each clamp and is
aligned with the V-
grooves at each side of
the mold.
5
Close the left fiber clamp.
The fiber clamp slides
from left to right. Keep
enough tension in the
fiber to prevent the fiber
from jumping out of the
V-grooves.
6
Gently pull the fiber to the
right to slide the left-side
fiber clamp to its rightmost
position.
Take note of the position
of the left fiber clamp in
Step 5 versus Step 6.
