manualshive.com logo in svg

Fujikura FSR-02, Basic Operation Manual

Share
Download
Fujikura FSR-02 Basic Operation Manual Download Page 3

Widget Associates 

Fujikura FSR-02 Recoater Basic Operation Manual 
 

Page 3 of 4 

 

7 

Close the right fiber clamp 

and the mold 

 

The recoater will display 

a READY message when 

functioning properly. 

8 

Press the SET button to 

begin recoating the fiber. 

 

The screen will display an 

INJECTION message and 

then a UV 

COMPENSATIVE message 

while recoating. 

9 

Open the mold when the 

FINISH message is displayed. 

 

 

10 

Press the SET button once 

more to start the proof test. 

 

Do not touch the 

recoater while it is 

performing the proof 

test. 

Summary of Contents for FSR-02

Page 1: ...FSR 02 is used to recoat and proof test optical fiber splices 2 SCOPE This instruction manual applies to all work stations and operators involved with optical fiber splicing at Widget Associates 3 OPERATING THE FSR 02 RECOATER Step Task Illustration Notes 1 Press and hold the ON OFF button to turn on the recoater The resetting function takes a few moments to complete 2 Allow the recoater to warm u...

Page 2: ...left to right Make sure the fiber is centered in the foam guides at the outer ends of each clamp and is aligned with the V grooves at each side of the mold 5 Close the left fiber clamp The fiber clamp slides from left to right Keep enough tension in the fiber to prevent the fiber from jumping out of the V grooves 6 Gently pull the fiber to the right to slide the left side fiber clamp to its rightm...

Page 3: ...message when functioning properly 8 Press the SET button to begin recoating the fiber The screen will display an INJECTION message and then a UV COMPENSATIVE message while recoating 9 Open the mold when the FINISH message is displayed 10 Press the SET button once more to start the proof test Do not touch the recoater while it is performing the proof test ...

Page 4: ... fiber by lifting the fiber up from the right side first Keep the fiber taut and straight when removing it from the recoater 13 Use Isopropyl Alcohol and Kimwipes to thoroughly clean the surface of the mold 14 Replace the protective tissues under each fiber clamp and the mold 15 Press and hold the ON OFF button to shut down the recoater The ON OFF button must be held until the SHUT DOWN message ap...

Reviews:

No comments

Brands by name

Popular brands

Load more brands