34
3
SELECTING THE REMOTE CONTROLLER MODE
Remote Controller
Holder
Transmitter
Shutter
Release
Button
Remove the remote controller from its holder by sliding it in the direction of
the arrow.
/
To replace the remote controller in the holder, slide the remote controller in the
direction opposite to the arrow until it clicks into position.
/
The specific remote controller used may be different than the one shown in the pic-
ture.
A FUJIFILM remote controller is required.
Fit the remote controller holder into the camera strap.
/
The remote controller holder can be easily opened with a coin.
/
The battery life is about 3 years (based on our test conditions). If the remote con-
troller no longer works, contact your local retailer where you bought your camera or
a FUJIFILM service center. A replacement battery will be available at only a small
cost.
