EN-3
ENGLISH
Changes and Additions
Focus-Frame Selection
Focus-Frame Selection
X-T1 Owner’s Manual
:
P
45
The procedure for selecting the focus point varies with
the option chosen for AF mode.
■
Single Point AF
The procedure for selecting the focus point is the same
as for
AREA
in the previous fi rmware version.
■
Zone AF
Press the function button (
Fn6
) to dis-
play the focus zone. Use the selector
to position the zone or press
DISP/BACK
to return the zone to the center of the
display.
Focus zone
To choose the number of focus frames
in the zone, rotate the rear command
dial.
Rotate the dial right to cycle through zone sizes in the
order 5 × 5, 3 × 3, 5 × 3, 5 × 5…, left to cycle through
zone sizes in reverse order, or press the
FOCUS ASSIST
button to select a zone size of 5 × 3. Press
MENU/OK
to
put your selection into eff ect.
■
Tracking (Focus Mode
C
Only)
Press the function button (
Fn6
) to dis-
play the focus frame. Use the selector
to position the focus frame, or press
DISP/BACK
to return the frame to the cen-
ter of the display. Press
MENU/OK
to put
your selection into eff ect. The camera
will track focus on the subject while the
shutter button is pressed halfway.
Focus frame
R
Manual focus-frame selection is not available when wide/
tracking is selected in focus mode
S
.
Burst Mode Focus-Frame Selection
Burst Mode Focus-Frame Selection
When the
DRIVE
dial is in the
CH
(high-speed burst)
position, the number of focus frames available in
focus mode
C
drops and the maximum zone size is
restricted to 5 × 3.
Single point
Zone
Wide/Tracking
