EN-7
ENGLISH
Changes and Additions
Flash Photography
Flash Photography
X-T1 Owner’s Manual
:
P
36, 37
Flash setup has changed.
1
Remove the hot shoe cover and slide the fl ash onto
the hot shoe as shown, stopping when it clicks into
place.
2
Raise the fl ash.
3
Select
FLASH FUNCTION SETTING
in the shooting
menu to display options for the supplied fl ash.
Q
If the fl ash is not raised, settings will be adjusted
for units connected via the sync terminal (
EN-8
).
4
Highlight items using the
selector and rotate the rear
command dial to change the
highlighted setting.
MODE
SUPPLIED FLASH
ADJUST
END
5
Press
DISP/BACK
to put the changes into eff ect.
Q
Depending on the distance to the subject, some
lenses may cast shadows in photos taken with the
fl ash.
Q
The fl ash will not fi re at some settings, for example
when the electronic shutter is used.
Q
Choose shutter speeds slower than
180X
when us-
ing the fl ash in exposure mode
S
(shutter-priority
AE) or manual (
M
).
R
In TTL mode, the fl ash may fi re several times with
each shot. Do not move the camera until shooting
is complete.
