EN-10
SU1830_case BL00544-100(
1
)
Conducting a final test
Carry out a final submersion test on the waterproof case after mounting the
digital camera. To check for water leaks, watch for any water leaking in while
immersing it in a water tank or a bathtub filled with water. Check it in a way
that lets you take it out of water immediately (to save the camera inside) if you
need to.
1
Immerse it in water for 30 seconds.
• If you see a continuous flow of
air bubbles from the joint of the
waterproof case while in the water,
this indicates a leak.
• When all is well, operate the
buttons and take some test shots
while it is under water.
2
After slowly lifting the waterproof case out of water, closely check
for the following:
• Water droplets near the joint of the
waterproof case.
• Water pooled inside the waterproof
case.
Dip it slowly in
water.
Joint
Water droplets
Positioning the Digital Camera in the Waterproof Case
02_A500_Wcase_EN.indd 10
02_A500_Wcase_EN.indd 10
4/5/2006 9:24:02 AM
4/5/2006 9:24:02 AM
