EN-10
Installation and Connection
RS485 Connections
When the camera is connected to a monitor via HD-SDI or the like, you can view the live feed, control the camera, and adjust
camera settings using an Pelco D/P-compatible control unit connected to the camera via RS485.
SX800
RS485 (Pelco D/P) connection
Pelco D/P-compatible
remote control
1
Connect the supplied plug to the power cable and plug the cable into the
camera power connector.
4
CAUTION
Use only DC 12 V power.
b
TIP
Customers must supply their own power cable.
2
Connect an RS485 signal cable to the six-pin connector RS485 contacts
(page 13).
1 2 3 4 5 6 7 8
3
Select RS485 mode by setting DIP switch
A
to “ON” and DIP switches
B
through
D
to “OFF”.
1 2 3 4 5 6 7 8
4
Turn the camera on.
1 2 3 4 5 6 7 8
