- 29 -
Pu
sh
d
o
wn
OPERATION OF RECEIVER
BLUETOOTH DEPTH & DATA COLLECTION
(Bluetooth app functionality)
The
receiver comes equipped with Bluetooth, a wireless
communication method. With this, you can record depth
information to a smartphone using the PL-AP Android app. You
may find this on the Android Play Store.
Connecting your PL-G MAX Receiver with the
Bluetooth PL-AP Android App:
To learn more about the PL-AP Android App and
how to use it, please refer to the PL-AP App Manual.
1.
Open Bluetooth settings on your Android device and have it
ready. Make sure it is still OFF in this step. Refer to page 6 to
learn how to find the Bluetooth settings.
2.
Turn on the PL-G Receiver by pressing the red power button,
and wait until “Processing” is complete.
3.
Hold down the “Depth” button on the PL-G until it says
“Wait Connection”.
4.
Quickly, on your Android device, turn your Bluetooth on and
connect to “PL-G.MAX” as soon as it appears. If prompted,
confirm the connection by selecting PAIR or OK.
5.
Quickly find and open the PL-AP app and select “PL-G”.
6.
Quickly Select the “Data Transfer” button. This button should
then turn into a “Stop Transfer” button.
7.
The PL-G receiver will now say “Established Connection”,
and you will be instructed to immediately begin operating the
Receiver.
①
83 kHz S40
<< Bluetooth >>
Wait connection
Blinking
Solid
83 kHz S32
<< Bluetooth >>
Failed
connection
83 kHz S26
<< Bluetooth >>
Established
connection
Invisible
If a Bluetooth connection is not established within 60 seconds,
the receiver will display “Failed Connection”.
To interrupt the connection process, press the Sensitivity Up or
Down button. The receiver will then revert to the previous
operation mode.
Invisible
83 kHz S26
<< Bluetooth >>
Interrupted
connection
