77
Displays in Viewfinder and LCD
Displays in the viewfinder
When pressing the shutter button half way
Lit
Slow blinking
Fast blinking
Focus mark
Correctly focused
The picture is out of focus.
The subject is not suitable for the AF mode;
thus, the AF mode is not working. Use the AF
lock feature to position the AF frame onto an
object whose distance and brightness are best
for the subject you wish to take. (
P.30, 32)
The distance to the subject is too close.
You need to have a distance of 0.3m or more
when using KLASSE W and 0.4m or more for
KLASSE S to fit the subject into the AF frame.
The distance displayed on the LCD also
blinks.
Flash mark
The flash will fire.
It is too bright and overexposed.
Select the
flash-off mode (
P.46) or make
more distance from the subject.
The flash is charging.
The shutter button cannot be pressed. Wait
until the charge of the flash completes.
Shutter speed
The shutter speed is too slow. It may cause
camera shake.
Out of the exposure interlocking range.
$
The manual-focus
mode is selected.
―
The AF lock is in use with the
AFL
button.
LCD
Blinking
Film counter
The film is not loaded correctly.
Load the film again, making sure it is loaded properly.
Distance to the
subject
The distance to the subject is too close.
You need to have a distance of 0.3m or more when using
KLASSE W and 0.4m or more for KLASSE S to fit the subject
into the AF frame.
Out of the exposure interlocking range
Reduce the AEB compensation amount. When using the
aperture AE mode, change the aperture.
$
The AF lock is in use with the
AFL
button.
(When the camera is turned off and then on while selecting the film sensitivity mode,)
the film sensitivity mode is in a manual mode.
Check the film sensitivity setting before photographing.
