FujiFilm GFX 100S, Owner'S Manual

Page: 64 / 368

40
2
F
irst St
eps
Inserting Memory Cards
Compatible Memory Cards
•
The camera can be used with SD, SDHC, and SDXC memory
cards. Both the UHS-I and UHS-II bus interfaces are supported.
•
UHS-II cards are recommended for high-speed burst photography.
•
Use cards with a video speed class of V60 or better to record
movies at a bit rate of 400 Mbps. To record movies with lower
bit rates, use cards with a UHS speed class of 3 or better or a
video speed class of V30 or better.
•
A list of supported memory cards is available on the Fujifi lm
website. For details, visit:
https://fujifilm-x.com/support/compatibility/cameras/ .
O •
Do not turn the camera off or remove the memory card while the memo-
ry card is being formatted or data are being recorded to or deleted from
the card.
Failure to observe this precaution could damage the card.
•
Memory cards can be locked, making it
impossible to format the card or to record
or delete images. Before inserting a mem-
ory card, slide the write-protect switch to
the unlocked position.
•
Memory cards are small and can be swallowed; keep out of reach of
children. If a child swallows a memory card, seek medical assistance
immediately.
•
miniSD or microSD adapters that are larger or smaller than memory
cards may not eject normally; if the card does not eject, take the cam-
era to an authorized service representative. Do not forcibly remove
the card.
•
Do not affi x labels or other objects to memory cards. Peeling labels
can cause camera malfunction.
•
Movie recording may be interrupted with some types of memory card.
•
Formatting a memory card in the camera creates a folder in which
pictures are stored. Do not rename or delete this folder or use a com-
puter or other device to edit, delete, or rename image fi les. Always
use the camera to delete pictures; before editing or renaming fi les,
copy them to a computer and edit or rename the copies, not the
originals. Renaming the fi les on the camera can cause problems
during playback.