FujiFilm GFX 100S, Owner'S Manual

Page: 341 / 368

317
T
echnical Not
es
12
For Your Safety
Wireless Network and Bluetooth Devices: Cautions
This product complies with the following EU Directives:
•
RoHS Directive 2011/65/EU
•
RE Directive 2014/53/EU
Hereby, FUJIFILM Corporation declares that the radio equipment type FF200003 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://dl.fujifilm-x.com/global/products/cameras/gfx100s/pdf/gfx100s_doc-aar.pdf
This compliance is indicated by the following conformity marking placed on the product:
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth®).
•
Maximum radio-frequency power (EIRP) :
WLAN: 11.36 dBm
Bluetooth: 3.78 dBm
IMPORTANT : Read the following notices before using the camera’s built-in wireless transmitter.
Q
This product, which contains encryption function developed in the United States, is controlled by the United States
Export Administration Regulations and may not be exported or re-exported to any country to which the United States
embargoes goods.
•
Use only a w Use only a wireless network or B ireless network or Bluetooth device luetooth device.. Fujifi lm does not accept liability for damages resulting from unauthorized
use. Do not use in applications requiring a high degree of reliability, for example in medical devices or other systems that
may directly or indirectly impact human life. When using the device in computer and other systems that demand a greater
degree of reliability than off ered by wireless network or Bluetooth devices, be sure to take all necessary precautions to
ensure safety and prevent malfunction.
•
Us Use only in the countr e only in the country in which the devic y in which the device was purchased. e was purchased. This device conforms to regulations governing wireless network
and Bluetooth devices in the country in which it was purchased. Observe all location regulations when using the device.
Fujifi lm does not accept liability for problems arising from use in other jurisdictions.
•
Do not use the device in location Do not use the device in locations subject to magneti s subject to magnetic fi elds, static ele c fi elds, static electricity, or radio i ctricity, or radio interference. nterference. Do not use the transmitter in
the vicinity of microwave ovens or in other locations subject to magnetic fi elds, static electricity, or radio interference that
may prevent reception of wireless signals. Mutual interference may occur when the transmitter is used in the vicinity of
other wireless devices operating in the 2.4 GHz band.
•
The wireless The wireless transmitter operates transmitter operates in the 2.4 GHz band in the 2.4 GHz band using DSSS, OFDM an using DSSS, OFDM and GFSK modulation. d GFSK modulation.
•
Security : Wireless network and Bluetooth devices transmit data via radio and consequently their use requires greater atten-
tion to security than applies in the case of wired networks.
-
Do not connect to unknown networks or networks to which you do not have access rights, even if they are displayed
on your device, as such access may be considered unauthorized. Connect only to networks to which you have access
rights.
-
Be aware that wireless transmissions may be vulnerable to interception by third parties.
-
This device cannot be directly connected to telecommunications networks (including public wireless LANs) operated
by providers or mobile, landline, Internet, or other telecommunications services.
•
The following may The following may be punishable by law be punishable by law::
-
Disassembly or modifi cation or this device
-
Removal of device certifi cation labels
•
This device oper This device operates on the same fre ates on the same frequency as commercial quency as commercial, educational, and m , educational, and medical devices and w edical devices and wireless transmitters ireless transmitters.. It also oper-
ates on the same frequency as licensed transmitters and special unlicensed low-voltage transmitters used in RFID tracking
systems for assembly lines and in other similar applications.
•
To To prevent interferenc prevent interference with the above dev e with the above devices, observe the fo ices, observe the following precautions. llowing precautions. Confi rm that the RFID transmitter is not in
operation before using this device. Should you observe that the device causes interference in licensed transmitters used
for RFID tracking, immediately stop using the aff ected frequency or move the device to another location. If you notice that
this device causes interference in low-voltage RFID tracing systems, contact a Fujifi lm representative.
•
Do not us Do not use this device on boa e this device on board an aircraft. rd an aircraft. Note that Bluetooth may remain on even when the camera is off . Bluetooth can be
disabled by selecting OFF for D CONNECTION SETTING > Bluetooth SETTINGS > Bluetooth ON/OFF .