101
Warning Displayed
Explanation
Remedy
Warning Displays
e
The table below lists the warnings that are displayed on the LCD monitor.
(Lit red)
(Blinking red)
The camera battery is low or completely
out of charge.
Load a new or fully charged battery.
There is a strong likelihood of camera
shake because the shutter speed is slow.
Use flash photography. However, place the camera
on a stable surface for some scenes and modes.
|
The AF (autofocus) cannot work effectively.
i
If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
i
Use AF lock to take the picture.
Outside the AE continuous range.
The picture can be taken, but the correct
brightness (exposure) will not be obtained.
Camera malfunction or fault.
NO CARD
CARD NOT INITIALIZED
CARD ERROR
CARD FULL
BUSY
WRITE ERROR
FRAME NO. FULL
READ ERROR
FOCUS ERROR
ZOOM ERROR
i
Turn the camera on again, taking care not to
touch the lens.
i
Turn the camera off and on again. If the
message still appears, contact your FUJIFILM
dealer.
No
xD-Picture Card
is inserted.
Insert an
xD-Picture Card
.
i
The
xD-Picture Card
is not formatted.
i
The
xD-Picture Card
contact area is
soiled.
i
Camera fault.
i
Format the
xD-Picture Card
on the camera.
i
Wipe the contact area on the
xD-Picture Card
with a soft dry cloth. It may be necessary to
format the
xD-Picture Card
. If the message still
appears, replace the
xD-Picture Card
.
i
Contact your FUJIFILM dealer.
i
The
xD-Picture Card
contact area is
soiled.
i
The
xD-Picture Card
is damaged.
i
The
xD-Picture Card
format is incorrect.
i
Camera fault.
i
Wipe the contact area on the
xD-Picture Card
with a soft dry cloth. It may be necessary to
format the
xD-Picture Card
. If the message still
appears, replace the
xD-Picture Card
.
i
Contact your FUJIFILM dealer.
The
xD-Picture Card
is full.
Erase some images or use an
xD-Picture Card
that has ample free space.
i
The data could not be recorded due to
an
xD-Picture Card
error or a
connection error between the
xD-
Picture Card
and camera.
i
The image cannot be recorded as it is
too large to fit in the available space on
the
xD-Picture Card
.
i
Re-insert the
xD-Picture Card
or turn the
camera off and then on again. If the message
still appears, contact your FUJIFILM dealer.
i
Use a new
xD-Picture Card
.
The timing for recording was incorrect
because the
xD-Picture Card
was
formatted on a PC.
Use an
xD-Picture Card
that was formatted on
the camera.
The frame number has reached 999-9999.
1
Insert a formatted
xD-Picture Card
into the
camera.
2
Set “RENEW” as the FRAME NO. setting in
the “
˜
” SET-UP menu.
3
Start taking pictures (The frame number starts
from “100-0001”).
4
Set “CONT.” as the FRAME NO. setting in the
“
˜
” SET-UP menu.
i
The played back file was not recorded
correctly.
i
The
xD-Picture Card
contact area is
soiled.
i
Camera fault.
i
An attempt was made to play a movie or
display an image that was not recorded
on this camera.
i
Images cannot be played back.
i
Wipe the contact area on the
xD-Picture Card
with a soft dry cloth. It may be necessary to
format the
xD-Picture Card
. If the message still
appears, replace the
xD-Picture Card
.
i
Contact your FUJIFILM dealer.
i
Movies cannot be played back.
100
Notes on the xD-Picture Card™
■
Image Memory Card
h
T h i s I m a g e M e m o r y C a r d i s a n e w i m a g e
recording media (
xD-Picture Card
) developed for
digital cameras. The Image Memory Card consists
of a semiconductor memory (NAND-type flash
memory) to record digital image data.
The recording process is electrically performed
and enables erasure of existing image data as well
as re-recording of new image data.
h
When using a new Memory Card, or a Memory
Card that has been formatted by a PC, be sure to
format the card with your digital camera before
using it.
■
Protecting Your Data
h
Images and movies may be lost or destroyed in the
following situations. Please note that FUJIFILM
assumes no responsibility for data that is lost or
destroyed.
1. Removal of the memory card or turning the power
off while the memory card is being accessed (i.e.,
during record, erase, initialization, and playback
operations).
2. Improper handling and use of the memory card by
the user or third party.
h
Save your important data to another media (i.e., MO
disk, CD-R, hard disk, etc.).
■
Handling
xD-Picture Card
h
When storing
xD-Picture Card
s, make sure that
they are kept out of the reach of children. An
xD-
Picture Card
could be swallowed cause suffocation.
If a child swallows an
xD-Picture Card
, seek
medical attention or call emergency number right
away.
h
When inserting the
xD-Picture Card
into the
camera, hold the
xD-Picture Card
straight as you
push it in.
h
Do not expose an
xD-Picture Card
to shock. Do not
apply pressure, and avoid bending.
h
Do not use or store
xD-Picture Card
in hot and
humid places.
h
Clean the
xD-Picture Card
with a soft dry piece of
cloth when dirty.
h
When carrying or storing an
xD-Picture Card
, keep
it in the special protective case.
h
The
xD-Picture Card
will work well for long time, but
will sooner or later lose its ability to store and play
back images or movies. If this happens replace it
with a new
xD-Picture Card
.
h
Never remove the
xD-Picture Card
or turn the
camera off during data recording or erasing (
xD-
Picture Card
formatting) as this could be damaged
to the
xD-Picture Card
.
h
The use of
xD-Picture Card
s is recommended with
the FinePix Z1.
The recording quality cannot be guaranteed when
xD-Picture Card
s other than those manufactured by
FUJIFILM are used.
h
The
xD-Picture Card
may feel warm when it is
removed from the camera after taking pictures. This
is normal.
h
Do not put labels on the
xD-Picture Card
. Peeling
labels can cause the camera not to work properly.
■
Using
xD-Picture Card
with a PC
h
When taking pictures using an
xD-Picture Card
that
has been used on a PC, reformat the
xD-Picture
Card
using your camera for best quality.
h
When formatting an
xD-Picture Card
, a directory
(folder) is created. Image data is then recorded in
this directory.
h
Do not change or delete the directory (folder) or file
names on the
xD-Picture Card
because this will
make it impossible to use the
xD-Picture Card
in
your camera.
h
Always use the camera to erase image data on an
xD-Picture Card
.
h
To edit image data, copy the image data to the PC
and edit the copy.
■
Specifications
Type
Image memory card for digital
cameras (
xD-Picture Card
)
Memory type
NAND-type flash memory
Conditions for use
Temperature:
0°C to +40°C
(+32°F to +104°F)
Humidity:
80% max. (no condensation)
Dimensions
25 mm
×
20 mm
×
2.2 mm
(0.98 in.
×
0.79 in.
×
0.09 in.)
(W
×
H
×
D)
Summary of Contents for FinePix Z1
Page 56: ...111 110 ...
