FujiFilm FinePix Z1, Owner'S Manual

Page: 45 / 57

88 89
Viewing
Images
6
●
!
“PRINT WITH DATE” is not available when the camera is
connected to a printer that does not support date printing.
5 1
Press “
a
” or “
b
” to select “PRINT WITH DATE”
or “PRINT WITHOUT DATE”. If “PRINT WITH
DATE” is selected, the date is imprinted on your
prints.
2
Press “
c
”.
0 1 0 2
PP I C T C T B R I R I DG E G E
P R P R I N T N T W I T H T H D A T E D A T E
P R P R I N T N T W I T HO U T O U T D A T E D A T E
P R P R I N T N T D P O F D P O F
O K O K
●
!
DPOF settings cannot be specified for movie.
●
!
Images photographed with a camera other than FinePix Z1
may not be specified DPOF settings.
6 1 Press “ d ” or “ c ” to display the frame (file) for
which you want to specify PRINT settings.
2 Press “ a ” or “ b ” to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more PRINT settings, repeat steps 1
and
2
.
3 Always press the “MENU/OK” button after the
settings are completed.
Y E S Y E S C A N C E L C A N C E L
F R A M E F R A M E
T O T A L T O T A L 0 0 0 0 9 0 0 0 0 9
S H E E T S S H E E T S 0 1 0 1
0 1 0 2 0 3
●
!
Press the “DISP/BACK” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
7
Press the “MENU/OK” button to download the data
to the printer and start printing the specified
number of prints.
P R I N T I N G N G
C A N C E L C A N C E L
111 1 9 1 9 1 9 1 9 S H E E T S S H E E T S
Disconnecting the printer
1
Check that “PRINTING” is not displayed on the
camera’s screen.
2
Press the “POWER” button on the cradle to turn
the power off.
4
“CHECKING USB” appears and then the menu is
displayed on the LCD monitor.
●
!
If the menu does not appear, check whether the “ ò ” USB
MODE setting is “
®
” PICTBRIDGE.
●
!
Depending on the printer, some functions are disabled.
C H E C C H E C K I K I N G N G U S U S B
P I P I C T B C T B R I D G E D G E
6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER —
PictBridge FUNCTION
6.2.2 Specifying images for printing without using DPOF (single-frame printing)
1 Press the “
w
” button for about 1 second to turn
the camera on in Playback mode.
2 Select “
®
” PICTBRIDGE in “
ò
” USB MODE
in the “
˜
” SET-UP menu (
➡
P.74).
3 Turn the camera off.
●
!
Do not connect to a PC when the “
ò
” USB MODE setting is
set to “ ® ” PICTBRIDGE. See P.104 if you connect to a PC
by mistake.
1
S E T S E T
O K O K
E N G L I S H E N G L I S H
N T S C N T S C N T S C N T S C
1
2
3
P I C T B R I D G E P I C T B R I D G E
0 1
0 2
2 1 Plug the AC power adapter connector into the
“DC IN 5V” socket on the cradle and then plug
the AC power adapter into the power outlet.
2 Connect the cradle to the printer using the USB
cable (mini-B).
3 Set the camera in the cradle.
4 Turn the printer on.
●
!
Plug the camera securely and vertically into the cradle
connecting plug.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Use an xD-Picture Card that was formatted on the camera.
Press the “POWER” button on the cradle.
3