10
11
Getting
Ready
1
2
Battery release catch
Indicators
Indicators
Hold the battery so that the indicators are aligned. Push the battery release catch aside while
loading the battery. Check that the battery is firmly held in place.
LOADING THE BATTERY AND THE MEDIA
1
Getting Ready
1
Check that the camera is turned off before opening
the battery cover.
●
!
If opening the battery cover while the camera is still on, the
camera will turn off.
●
!
Do not apply force to the battery cover.
Do not open the battery cover while the camera is
on. This could damage the
xD-Picture Card
or ruin
the image files on the
xD-Picture Card
.
Compatible battery
Always use the Rechargeable Battery NP-40
(included).
The use of other brands of rechargeable battery
could cause faults or damage to the camera.
h
Rechargeable Battery NP-40 750 mAh (1)
●
!
The battery is not fully charged at shipment and must be
fully charged before being used.
●
!
Do not stick labels onto the battery as this could cause the
battery to become jammed inside the camera.
●
!
When removed from the camera, the battery should be stored
and transported in the case provided. Any contact between the
battery terminals could cause the battery to short-circuit and
overheat.
●
!
See P.100-101 for information on the battery.
Indicator
Terminals
4
3
Close the battery cover.
●
!
If the
xD-Picture Card
is oriented incorrectly, it will not go all
the way into the slot. Do not apply force when inserting an
xD-Picture Card
.
Gold marking
Gold marking
Gold contact area
Gold contact area
Align the gold marking on the xD-Picture Card slot
with the gold contact area on the
xD-Picture Card
.
Push the card firmly all the way into the slot.
◆
How to replace the
xD-Picture Card
◆
Push the
xD-Picture Card
into the slot and then
slowly remove your finger. The lock is released and
the
xD-Picture Card
is pushed out.
