81
Settings
4
80
h
Optical zoom focal length
✽
Approx. 38 mm to 130 mm, max. zoom scale: 3.4
×
h
Digital zoom focal length
✽
Approx. 130 mm to 741 mm,
max. zoom scale: approx. 5.7
×
h
Optical zoom focal length (
„
)
✽
Approx. 39.5 mm to 135 mm, max. zoom scale: 3.4
×
h
Digital zoom focal length (
„
)
✽
Approx. 135 mm to 770 mm,
max. zoom scale: approx. 5.7
×
✽
35 mm camera equivalents
The position of the “ ” indicator on the
zoom bar shows the zooming status.
The area to the right of the separator
indicates digital zooming, while the area
to the left indicates optical zooming.
Zoom bar display
Optical zoom
Digital zoom
Using the digital zoom allows you to enlarge your
subject and shoot it. However, it will lower your
image quality. Set the digital zoom when requiring it.
Use this function to control the digital zoom.
When zooming changes between optical and
digital, the position of the “
■
” indicator stops. Move
the Zoom switch to same direction again to start
moving the “
■
” indicator.
●
!
If the shot goes out of focus during zooming, hold the shutter
button down halfway to refocus the shot.
ë
DIGITAL ZOOM
DIGITAL ZOOM
DIGITAL ZOOM
OFF
OFF
OFF
OFF
ON
ON
OK
OK
2
MIN
MIN
1
3
2
ON
ON
SET
SET
SET
SET
:
:
:
:
:
:
ê
LCD BRIGHTNESS
To adjust LCD monitor brightness:
1
Press “
d
” or “
c
” to adjust the LCD monitor
brightness.
2
Press the “MENU/OK” button to confirm the new
setting.
4
5
-
+
3 2 1
0
1 2 3 4 5
SET
SET
CANCEL
CANCEL
0
1
0
2
✽
How to use the SET-UP menu (
➡
P.76)
é
FRAME NO.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
CONT.:
Pictures are stored beginning from the
highest file number stored on the last
xD-
Picture Card
used.
RENEW:
Pictures are stored on each
xD-Picture
Card
beginning with a file number “0001”.
Setting this function to “CONT.” makes file
management easier. It makes sure that file names
are not duplicated when images are downloaded to
a PC.
●
!
When the camera settings are “
ú
” RESET, the frame
number setting (“CONT.” or “RENEW”) is changed to
“CONT.” and the frame number itself does not return to
“0001”.
●
!
When the
xD-Picture Card
already contains image files with
file numbers higher than the highest file number on the last
xD-Picture Card
, images are stored beginning from the
highest file number on the current
xD-Picture Card
.
A
A
B
B
Formatted
xD-Picture Card
used for both
A and B.
0001
0005
0006
0010
0001
0005
0001
0005
<
CONT.
> <
RENEW
>
Check the file number by viewing the image. The
last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers,
while the first 3 digits show the directory number.
●
!
When changing the
xD-Picture Card
, always turn the
camera off before opening the battery cover. Opening the
battery cover without turning the camera off may cause the
frame number memory to not function.
●
!
File number runs from 0001 to 9999. Once 9999 is exceeded,
the directory number changes from 100 to 101. The
maximum number is 999-9999.
●
!
The displayed frame number may differ for images
photographed on other cameras.
●
!
When [FRAME NO. FULL] appears, see P.103.
2 / 2 4 / 2 0 0 6 1 0 : 0 0 A M
2 / 2 4 / 2 0 0 6 1 0 : 0 0 A M
2 / 2 4 / 2 0 0 6 1 0 : 0 0 A M
1 0 0 - 0 0 0 9
1 0 0 - 0 0 0 9
1 0 0 - 0 0 0 9
Directory number
File number
Frame number
SET-UP
ã
PLAYBACK VOLUME
To adjust volume while playing back movie and
voice memo:
1
Press “
d
” or “
c
” to adjust the volume. The
larger the number, the larger the volume is
emitted. “0” indicates a sound deadening.
2
Press the “MENU/OK” button to confirm the new
setting.
SET
SET
CANCEL
CANCEL
1
0
2 3 4 5 6
7
8 9 10
0
1
0
2
✽
How to use the SET-UP menu (
➡
P.76)
